The electrical equipment cleaning agent is an efficient, convenient, and safe solvent cleaning agent, which can quickly remove oil, dust, iron scurf moisture and other sundries on various electrical equipment such as motor equipment, electric generators, stators, insulators, coils, switch cabinet row and so on. There is no residue after cleaning, which can prolong the service life of the equipment and make the equipment in good working condition. It is a good helper for industrial and mining enterprises to maintain motor and electrical equipment.
Clean the oil and impurities of various electrical equipment such as electric motor, electric generators, solenoid valve, automatic control switch, electric tool, spark plug, terminal strip, distribution cabinet, high-voltage porcelain bottle, etc. It can be used with electricity, spray cleaning, soaking, scrubbing, and ultrasonic.
1. It has good insulation performance and can clean electrical equipment which cannot be powered off.
2. The equipment performance will not be affected during cleaning and live cleaning.
3. Remove dust, iron scurf, sludge, greasy dirt, moisture, and other sundries quickly that cause motor equipment fault.
4. It can volatilize completely without leaving any trace after volatilization.
5. The electronic device cleaner has no corrosion to various metals, rubber, plastic insulating paint, and fibers.
6. It is safe and reliable, easy to operate, and high efficiency.
1. 450m canned cleaning method: align the parts to be cleaned, directly press the nozzle and spray directly. A red extension pipe can also be inserted at the nozzle for spray washing.
2. 20 liters barrel cleaning method: first, ensure no moisture in the cleaning equipment.
3. Immersion method: soak the motor equipment, motor rotor, machines, tools, and parts to be cleaned directly in the container of electrical equipment cleaning agent, take them out after 1-3 minutes, and dry them naturally. Since the lubricating grease is cleaned simultaneously, be sure to reapply the lubricating grease at the parts to be lubricated before starting the equipment.
4. Spray method: when the spray method is adopted, for a wet environment or high-pressure cleaning, first cut off the power supply, spray the mechanical and electrical equipment to be cleaned to remove the heavy iron powder, dust, thread ends, and other sundries on the equipment surface. Then insert the liquid spraying straw into the electrical equipment cleaning agent for spraying. Wash and air dry naturally. After the parts to be lubricated are re-coated with lubricating grease, the equipment can be powered on.
5. Scrubbing method: The parts can be removed and scrubbed with a cloth for electromechanical equipment and appliances that do not need to be cleaned by immersion method and spray method.
1. Avoid the electrical equipment cleaning agent from contacting the skin for a long time, and pay attention to protection during operation.
2. Keep a good ventilation environment on-site during use.
3. A small amount of leakage can be washed with a mop, and a large amount of leakage can be absorbed with sand.
4. Keep away from the fire source when using. The waste liquid can support combustion and be discharged carefully.
5. Prevent water and dirt from immersing the cleaning agent barrel.(6) Industrial supplies, keep away from children.
2019/04/26
English
français
Español
русский
العربية
Polska
